Show Vlan Brief. Implementing VLANs Shows a basic summary of the VLAN information on the switch show vlan [ access-map name | brief | dot1q { tag native} | filter [ access-map | vlan] | group [ group-name name] | id vlan-id | ifindex | mtu | name name | private-vlan remote-span | summary] Displays parameters for all VLANs or the specified VLAN on the device
Vlan Network Diagram from guideparthesperus.z13.web.core.windows.net
Config status Displays the configuration status for the VLANs The interfaces I listed are all trunks but the command will display both access and trunk ports associated with the VLAN
Vlan Network Diagram
Hi to all, till now to gather brief information about implemented vlan, especially the description, i use the "show vlan brief" command Config status Displays the configuration status for the VLANs SW3#show vlan brief VLAN Name Status Ports —- ——————————- ——— ——————————- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Fa0/5, Fa0/6, Fa0/7, Fa0/8 Fa0/9, Fa0/10, Fa0/11.
Cisco networking ppt download. show vlan [brief | dot1q tag native | group | id vlan-id | mtu | name vlan-name | private-vlan [type] | remote-span | summary] The interfaces I listed are all trunks but the command will display both access and trunk ports associated with the VLAN
VLAN_如何给vlan命名CSDN博客. I wondered if, in the output of the show vlan brief command, I can see also the ports belonging to an active VLAN but in a state different from up/up During my work i found devices that not support this command but only: show vlans and the output is : Virtual LAN ID: 13 (Inter Switch Link Encapsulation) vLAN Trunk Interface: FastEthernet2/0.13